www.fmiproducts.com
111026-01G
13
The following tips should be followed to as
-
sure that both the fireplace and the glass door
retain their beauty and function properly. Both
the flue damper and the glass doors must be
fully opened before starting the fire. This will
provide sufficient combustion air and maintain
safe temperatures in the firebox.
IMPORTANT:
The glass must be allowed to
warm slowly and evenly. The tempered glass
will withstand a gradual temperature rise to
550° F, which is more than a normal fire will
generate. Such materials as pitch/wax laden
logs, very dry mill end lumber and large
amounts of paper or cardboard boxes can
create an excessively hot fire and should not
be burned in this fireplace. Always keep the
fire well back from the doors and never allow
flames to contact the glass.
WARNING: Fireplaces
equipped with glass doors
should be operated only with
doors fully opened or doors fully
closed. Doors, if left partly open,
may draw gas and flame out of
the fireplace opening creating
risks of both fire and smoke.
Cleaning Glass
Clean the glass with any commercial glass
cleaner or soap and water. Do not use any
abrasive material to clean the glass. Do not
clean the glass with any cool water is the glass
is still hot from the fire and smoke.
A gas line or gas log lighter may be installed
for the purpose of installing a vented or vent-
free decorative gas appliance incorporating an
automatic shutoff device and complying with
the S
tandard for Decorative Gas Appliances
for Installation in Vented Fireplaces, ANSI
Z21.60
or
American Gas Association draft
requirements for Gas Fired Log Lighters for
Wood Burning Fireplaces, Draft NO. 4
dated
August, 1993.
If you wish to install an unvented (vent-free)
gas log set, only unvented gas log sets which
have been found to comply with the standard
for unvented room heaters, ANSI Z21.11.2 are
to be installed in this fireplace.
OpeRatiOn and Maintenance guidelines
Continued
OUTSIDE AIR AND DAMPER
HANDLE OPERATION
The damper handle, which opens and closes
the damper blade, is located in the upper front
face of the fireplace. Pushing the handle into
the left of the keyway slot will free the damper
blade to automatically open. Pushing the
handle in to the right will lock the damper
blade closed (see Figure 22).
The outside air kit handle is located at the left
hand side of the fireplace (see Figure 22).
Pulling the handle out will free the outside air
door to open. Pushing the handle in will lock
the door closed.
WARNING: Risk of fire! Re-
place grate with FMI PRODUCTS,
LLC model 111028-01 only. This
grate has been designed to keep
the operation of your fireplace
safe and efficient.
For further operating guidelines, instructions
and warranty information, please refer to your
homeowner's guide or contact your authorized
dealer.
Figure 22 - Damper and Air Kit Handle
OPE
N
CLOS
E
Damper
Handle
Outside Air
Kit Handle
Keyway
Slot
Handle
Retainer
