www.fmiproducts.com
125566-01C
20
INSTALLATION
Continued
3
4
5
6
Figure 30- Installing Log # 3
Figure 32- Installing Log # 5
Figure 33- Installing Log # 6
Figure 31- Installing Log # 4
Metal Pin
Metal
Pin
5. Place the left top back log (#5) on top of
the rear log. Match the rectangular projec-
tion on top of the left side of the rear log
with the rectangular hole on the bottom of
the left top back log. Match the metal pin
on the top of the rear log with the round
hole in the bottom of the left top back log.
See Figure 32.
6. Place the left top front log (#6) on the top
of the middle log and the left top back log.
Match the rectangular projection on top of
tyhe middle log with the rectangular hole
on the bottom of the left top front log. The
left top front log will rest on the flat part of
the left top back log. See Figure 33.
7. Place the right crossover log (#7) on top
of the middle log and rear log as shown in
Figure 34, page 21. Match the round peg
on the top of the rear log with the round
hole on the bottom of the right crossover
log and square peg on the top of the
middle log with the square hole on the
bottom of the right crossover log.
8. Match the round hole on the bottom of the
center crossover log (#8) with the metal
pin on the top of the right crossover log.
Rest the front of the center crossover log
on top of the front right log and against the
grate. See Figure 35, page 21.
9. Final Assembly is shown in Figure 36,
page 21.