www.fmiproducts.com
125566-01C
18
4
INSTALLATION
Continued
Figure 23 - Installing Log #4
Rib
4. Place front log (#4) on top of left and
right bottom logs as shown in Figure 23.
Notches in bottom of log #4 will fit over
ribs in logs #2 and #3.
5. Place top left log (#5) onto rear log (#1) and
front log (#3). Match round peg on bottom
of top left log (#5) with round hole in front
log (#3) and square hole in log #5 with
square peg on log #1 (see Figure 24).
6. Place top middle log (#6) onto rear log (#1)
and front log (#3). Match square peg on
bottom of log #6 with square hole on log
#4 and round hole on log #6 with peg on
log #1 (see Figure 25).
7. Place top right log (#7) onto top middle
log #6 and front log (#3) matching peg on
bottom of top right log #7 with hole on top
middle log #6 and hole in top right log #7
with peg on front log (#3) (see Figure 25).
8. Final Assembly is shown in Figure 26. See
Figure 27 on page 19 for additional views.
Figure 24 - Installing Log #5
Figure 25 - Installing Logs #6 and #7
6
7
5
Figure 26 - Final Assembly
