10
105383
UV32C and RUV32 UNVENTED 32" FIREBOX
FIREPLACE MANUFACTURERS INC.
INSTALLATION
Continued
34 3/4"
17 3/4"
33" (UV32C)
34 1/4" (RUV32)
Figure 13 - Rough Opening for Installing
in Wall
BUILT-IN FIREBOX
INSTALLATION
Built-in installation of this firebox involves
installing firebox into a framed-in enclo-
sure. This makes the front of firebox flush
with wall. If installing a mantel above the
firebox, but you must follow the clearances
shown in Figure 7, page 8. Follow the in-
structions below to install the firebox in this
manner.
1.
Frame in rough opening. Use dimen-
sions shown in Figure 13 for the rough
opening
If installing in a corner, use dimensions
shown in Figure 14 for the rough open-
ing. The height is 33" (UV32C) or 34
1
/
4
"
(RUV32), which is the same as the wall
opening in Figure 13.
2.
Install gas piping to firebox location.
This installation includes an approved
flexible gas line (if allowed by local
codes) after the manual shutoff valve.
The flexible gas line must be the last
item installed on the gas piping. See
Connecting to Gas Supply in log set
owner’s manual.
3.
If using FA3700 blower accessory
(Model UV32C only), see Installing
Blower Accessory for built-in installa-
tion, page 8.
4.
Attach flexible gas line to log set. See
Connecting to Gas Supply in log set
owner’s manual.
5.
Carefully insert firebox into rough
opening.
Height
Front Width
Depth
Model #
Actual
Framing Actual
Framing Actual
Framing
UV32C
32
3
/
16
" 33"
34
3
/
8
"
34
3
/
4
"
16
11
/
16
" 17
3
/
4
"
RUV32
33
11
/
16
" 34
1
/
4
"
34
3
/
8
"
34
3
/
4
"
16
11
/
16
" 17
3
/
4
"
Figure 15 - Attaching Firebox to Wall
Studs
Nailing
Flanges
Nails or Wood
Screws
39 3/8"
27 7/8"
55 5/8"
34 3/4"
Figure 14 - Rough Opening for Installing
in Corner
6.
Attach firebox to wall studs using nails
or wood screws through holes in nail-
ing flange (see Figure 15).
7.
Check all gas connections for leaks. See
Checking Gas Connections in log set
owner’s manual.
