FMI PTW72, Руководство пользователя, Страница: 7 / 335

f. Outfeed Control Web\Tack Placing switch in the Web position will allow
control of the outfeed conveyor at the web splice station control panel.
Placing switch in the
Tack position will allow control of the outfeed
conveyor from the Tack station control panel.
g. GANTRY SPEED-LO-MED-HI— Use to select low, medium, or high speed
for gantry traverse movement
h. GANTRY MAGNET POWER— Use to vary the strength of the magnets on
the gantry lift beam.
i. GANTRY TRAVERSE-ENABLE-DISABLE —Place switch in the ENABLE
position to allow gantry traverse movement. Place this switch in DISABLE to
prevent gantry traverse movement.
j. UP-DOWN-REV-FWD— Use to manually jog the gantry traverse in the
forward and reverse direction. Also use to manually move the lift beam up
and down.
2