FMI PTW72, Руководство пользователя, Страница: 15 / 335

sequence and turn hydraulics off. Manual operations override automatic
operations.
Example: When beam already has weld on bottom side copper wheels should
not be used thus can be locked out by positioning switch to retract
them.
NOTE: See programming section to set time durations for automatic mode.
PTW Programming
Main Screen
Speed Percent
This parameter is used during welding and welder JOG sequence.
Example: 100% = 120 inch / minute
50% = 60 inch / minute
0% = 0 inch / minute
Note: To change speed percent variable; move cursor to variable, type number
and press enter or use increase button (F1) and decrease button (F2).
Welder Actual
This is the actual speed that the pressure wheels are turning in inches / minutes.
Welder actual is determined by adjusting speed percent.
Increase
This increased speed percent. Press button F1.
Decrease
This decreases speed percent. Press button F2.
Note: All main screen parameters may be used in manual or automatic mode.
10