FMI PTW72, Руководство пользователя, Страница: 17 / 335

This is the distance the trailing end of the beam will travel after clearing beam
reference point sensor and will turn off Head #2 welding in auto mode.
In Down Time
This is the time the infeed hold down is energized in auto mode. The In Down Time
and the In Relax Time is used to control the frequency and the duration of the pulse.
In Relax Time
This is the time the infeed hold down is relaxed in auto mode. The infeed hold down
pulsates during automatic operation. The
In Down Time and the In Relax Time is
used to control the frequency and the duration of the pulse.
The following applies only for those with the Brush option.
Brush on Distance
This is the distance the leading end of the beam travels after making beam end
point sensor, to activate brush in auto mode.
Brush Off Dist
This is the distance the trailing end of the beam travels, after clearing beam end
point sensor, to deactivate brush in auto mode.
General Information
•
To change any of the setup parameters, using arrows move cursor to the
desired variable. Type desired number and press enter.
•
All setup parameters can be used only in automation mode.
•
To return to main screen press F5.
Production
Feet Welded
This variable records linear travel of beam during weld cycle. This measurement is
recorded in feet.
Note: This parameter is available in manual and automatic mode. This parameter
needs to be reset periodically.
Note: Press F1 to reset Feet Welded.
Time Welded
12