5
107599
OWNER’S MANUAL
For more information, visit www.desatech.com
STOVE BODY ASSEMBLY
1.
Lift off corrugated box enclosing stove
body crating.
2.
Remove all screws fastening the wood
frame enclosure. Spread wood frame open
and lift away from plastic-bagged stove
body. The bottom pieces of pallet wood
will remain bolted to the stove body.
3.
Remove plastic bag from stove body.
4.
Remove back panel from stove (see
Figure 6). Use an adjustable wrench or
a 10 mm socket. Remove six (6) bolts
and washers. Keep bolts and washers
to attach rear cover.
5.
Remove all contents from inside stove
cavity. Contents include:
(1) - Stove bottom (Discard - Not used
with this application)
(4) - Legs with leg leveler bolts
(1) - Bottom door
(3) - Top grates
(2) - Brackets
(1) - Hardware kit bag with fasteners
6.
Carefully lay stove body on back to at-
tach bottom components to stove body
(see Figure 7). Rest stove on drop cloth
or blanket to avoid scratching stove edges.
7.
Remove remaining pallet wood at-
tached to bottom of stove body (see
Figure 8). Use an adjustable wrench to
remove bolts.
8.
Fasten each leg to stove with four (4)
M8 x 1.25 - 20mm bolts. Use a flat
washer and lock washer with each bolt.
Tighten bolts into threaded holes on
stove body (see Figure 9 and Figure 10
on page 6). Use an adjustable wrench
or a 12mm socket.
Figure 7 - Laying Down Stove On Side
Figure 6 - Removing Back Panel
Bolt
Product
Identification
Label
Back
Stove
Panel
CAST IRON STOVE
AND DIRECT-VENT
BURNER SYSTEM
ASSEMBLY
Figure 8 - Removing Pallet Wood From The Bottom of The Stove
Figure 9 - Locating Threaded Holes for Legs, and Door Attachment
Pallet Wood
Bolt
Pallet Wood
Bottom Of
Stove Unit
Front
Door Hinge Step
Bolt Hole
Door Catch Bolt
With Adjustable
Hex Nuts Hole
Leg
Hole
Leg Hole
Leg
Hole
Front
Bottom Of
Stove Unit
Continued
Pallet
Wood
Bolted to
Bottom of
Stove
Body
Front of
Stove
Unit
Top of Stove Unit
Front of
Stove Unit
Top of
Stove Unit
Drop
Cloth/
Blanket
