www.fmiproducts.com
125079-01F
22
FIREPLACE INSTALLATION
Continued
LAVA ROCK, DECORATIVE GRATE,
EMBER FLAKES, GLOWING EMBERS
AND SCRAP LOG INSTALLATION
Lava rock, ember flakes, glowing embers and
scrap log pieces are included with your fireplace.
Install these items while glass doors are open
and/or removed.
1. Follow instructions from
Removing/Re-
placing Glass Door
, page 21, to move
glass out of the way of this installation.
2. For 36" models only:
install 3 loose logs
by placing log #1, log #2 and log #3 onto
one piece log as shown in Figures 28, 28a
and 28b.
Figure 29 - Installing Lava Rock
Lava Rock
Figure 28 - Installing Loose Logs
Figure 28a - Installing Loose Log #1
Figure 28b - Installing Loose Logs #2
and #3
Loose Log #3
Loose Log #1
Loose Log #2
Loose Log #2
Loose Log #3
Loose Log #1
Underneath Log #2
Glowing Embers
3. Pull glowing ember material apart into
pieces no larger than a dime. Place these
pieces loosely and sparingly directly onto
exposed burner ports (Figure 28). This
will create the glowing ember appearance
as flame touches ember material. Do not
block air slots by using too much ember
material in one area. Do not block pilot
ports with embers. It is not necessary
to use all of the glowing ember material
provided.
4. Place lava rock around base of burner.
Make sure burner ports are not covered
(see Figure 29).