Fmart YZ-X1, Инструкция по эксплуатации

Страница: 16 / 19

5 Resume to Default Setting
If the machine has some software system problems during the using ,it can be triggered by the
1 Hold down the host front collision left sensor when the produce is in shutdown state.
2 While hold down the host front collision left sensor ,open the power switch on the bottom ,the
host machine lights starts blinking.
3 Until the indicator lights became light on,hold down the host front collision right sensor,at this
again and release the left and right sensors.
4 The product will restart,at this point the restore the factory settings was completed.