Fmart YZ-X1, Инструкция по эксплуатации

Страница: 10 / 19

狪
3 Product operations
<= *
according to “up, down, left and right” direction button.
2 Press the clock button once again to save the setting.
2.Set the pre-scheduled cleaning time
1 Point the remote controller at the machine (the machine is in standby status).
2 Long press the “plan” button in the remote controller for 3 seconds into the plan mode, and set
3 Press the on/off button to save the settings .
4 Please set the time to 00:00 if you want to cancel the appointment function. Press the On/Off
"
Attention:
1 Set clock for your remote control before cleaning, the time settings are using real time.
2 Replace the remote control batteries, reset the appointment.
3 This machine uses real time for an appointment. If power is off, you will need to make an
appointment.
4 Make an appointment for each half hour, clock settings are in minutes.
5 It just can be set once if you make appointment by the remote control, please set by APP if
you want to make several appointments.
3.4 Clean mode
1.Automatic clean
Press the plan cleaning key on host or the
key on remote then product into the bow-
shaped path planning mode of cleaning, will
after cleaning
Attention:
Machine in any cleaning mode, press the
remote control "on/off" button or sweep button
on the machine to stop working.