•
Various functions
Door opening
When you open the oven door that way interrupting the cooking cycle, the number 8 icon will turn
green and the time will freeze and the oven will give pause until the door is closed again. Once the door
closed the coking cycle will resume where left off.
Reversing turbins
The engine of the oven stops to allow changing the direction of rotation. Oven changes the direction of
rotation of motors every 96 seconds and leaving a gap of 24 seconds to stop the motors. During this 24
seconds the dumidifier is not working.
6.3 Disassembling the door for replacement (only for hinged door models)
Before disassembling the door, let the unit cool down and follow the steps below:
1.
Open the door all the way.
2.
Unfold the flanges on the joints and close the door partially until making contact with each groove on both
flanges.
3.
Remove the door by gently pulling out and upwards.
4.
To assemble the door again, insert the door by placing the lower groove of the hinge on the slot of the oven
body . Then, fold the flanges again.
6.4 Changing the door opening direction (only for models RXL)
In ovens with side door opening, the door opening direction may be changed by following these instructions:
1.
Remove the socket head screws “1” and “2” and remove the hinges.
2.
Remove the Allen head screws placed at positions “3” and “4”.
3.
Turn the door 180º
4.
Place hinge “1” at position “4” and hinge “2” at position “3”, assembly the door in the new position and tighten
the socket head screws.
5.
Place the Allen head screws at positions “1” and “2”.
6.
Change the door micro “5” to the opposite side.
Note
: Do not fully tighten the hinge screws until the door is appropriately adjusted in its position.
21
