FLYSURFER PEAK5, Руководство пользователя

Страница: 16 / 22

EN
GL
ISH
16
PA
CK
iN
g U
P
10 PACKiNg UP
A FLYSURFER kite is quickly packed. Make sure that the bridle
lines are stored securely inside the kite and the control bar does
not get caught between them.
Wind the lines round the bar until you get to the mixer. Se-
cure the lines with the elastics or a half hitch. Keep hold of the
bar, or put it down somewhere out of the way of the bridle lines.
Fold the kite in half along the middle (tip on tip) and make
sure that the bridle is inside both halves. Also make sure that
there are no bridle lines over the outside skin.
Tip: If you do not want to roll a wet bar into your kite, there is a
method to attach the bar to the outside of the bag. Fold the kite
in the middle (tip on tip) and then roll up the kite, including the
bridle, and put it into the bag. Then roll up the bar and attach it
to the outside of the kitebag.
Lay the bar on-top of the kite and a bit away from the tips.
Lay the bridle lines in between the folded kite.
Roll up the kite around the bar. Make sure that no sharp ob-
jects on the beach damage the cloth.