FLYSURFER Infinity 2.0 Bar, Руководство по эксплуатации

Страница: 19 / 47

EN
37
03
MA
IN
T
EN
A
N
C
E
EN
36
The Leader Line can be attached
behind either the knot or the plastic
ball. Attach the Leader Line with a
larks head knot and make sure that
you pull it tight. Pull down the floater
and Stopper Ball to cover the knots.
Suicide Loop
The Infinity 2.0 Bar has the option to
be used with the Suicide Loop which
allows the kite to be ridden in suicide
mode, but still has the ability to be
leashed out via the Quick Release, for
those who wish to do many unhooked
tricks. We only recommend this to very
experienced kitesurfers as the bar
does not go into the safety mode when
letting go of the bar when unhooked.
Open the Quick Release.
Place the Suicide Loop together
with the loop of the Infinity 2.0 Loop
over the metal pin and close the
the Quick Release again.
Clip the Safety Leash to the Suicide
Loop as well as the ring of the endline.
Push the release handle up
with one hand.
Let the release handle slide all
the way down over the metal pin. It is
normal that there is 1,5 cm of room bet-
ween the release handle and the plastic
bridge of the Quick Release-system.
03 MAINTENANCE
03.01 Trim and Modification
Changing the length
The Infinity 2.0 Bar can be adjus-
ted lengthwise by five to ten cen-
timeters. This allows you to adapt
the bar for different kite sizes.
Push up the Stopper Ball and
the floater. Open the larks head
knot at the winder.
Bring the short knotted line into
the desired position on the winder.
For the shortest bar size you may
need to puncture the skin on the
inside of the bar winder. The knot on
the short line will need to be opened
and the line threaded into the new
position and fixed with a knot.