Digital Proportional Radio Control System
6
4.Instructions
After setting up, follow the instructions below to operate the system.
Follow the steps below to turn on the transmitter:
1. Check to make sure that that battery is fully charged and installed correctly.
2. Toggle the switch to the [ON] position. When active the R.LED will be lit.
3. Power on the receiver.
•
For safety always power on the transmitter before the receiver.
4.3 Binding
The transmitter and receiver have already been bound at the factory.
1 . Tu r n o n t h e t r a n s m i t t e r w h i l e h o l d i n g t h e b i n d b u t t o n t o e n t e r b i n d i n g m o d e . G . L E D w i l l s t a r t
f l a s h i n g q u i c k l y.
•
Once in binding mode release the BIND button.
2 . T h e r e c e i v e r w i l l p o w e r o n a n d w a i t f o r 1 s e c o n d , i f w i t h o u t c o n n e c t i o n , i t w i l l e n t e r i n t o t h e
b i n d i n g s t a t e a u t o m a t i c a l l y ;
3 . O n c e b i n d i n g i s s u c c e s s f u l t h e L E D o f t h e r e c e i v e r w i l l k e e p o n , a n d t h e G . L E D w i l l o ff .
N o t e : W h e n b i n d i n g , p u t t h e t r a n s m i t t e r i n t o b i n d i n g s t a t e f i r s t , t h e n t h e r e c e i v e r.
4.1 Power On
However if the receiver needs to be replaced or additional receivers bound follow these steps:
Note
•
Operate with caution in order to avoid damage or injury.
Note
•
Make sure that the throttle is at its lowest position and the switches are set to their up
position.
•
Applicable to the FS-VK-G4P transmitter and the VK-R4A receiver. Different receivers have
different binding procedures. For more information, visit the FLYSKY website for manuals
and other related information.
•
Product information is updated regularly, please visit our website for more information.
1. R.LED
:
The red power indicator;
2. G.LED
:
The green status indicator;
3.
Car battery: Two-colors light for battery power level display (hereinafter referred to as D3)
•
When the battery power level is high, the D3 green keeps on.
•
When the battery power level is medium, the D3 orange keeps on.
•
When the battery power level is low, the D3 red keeps on.
•
When the battery power level is off, the D3 red slow flash
•
When the receiver drops the code, the two-colors light is off.
4.2 LED
Indicator
