5
3.
Getting Started
Before operation, install the battery and connect the system as instructed below.
3.1 Transmitter Battery Installation
Danger
•
Only use specified battery (X4 AA batteries).
Danger
•
Do not open, disassemble, or attempt to repair the battery.
Danger
•
Do not crush/puncture the battery, or short the external contacts.
Danger
•
Do not expose to excessive heat or liquids.
Danger
•
Do not drop the battery or expose to strong shocks or vibrations.
Danger
•
Always store the battery in a cool, dry place.
Danger
•
Do not use the battery if damaged.
Battery Type: AA
1. Open the battery compartment cover.
2. Insert 4 AA batteries with the correct polarity. Make sure it is connected with the correct polarity to avoid damage.
3. Replace battery compartment cover.
Low battery alarm: When the battery is lower than 4.2v, the G.LED on the panel will flash slowly.
