5107403-03
Husqvarna Outdoor Products
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
ENGLAND
Telephone - 0870 609 1901 Fax - 0870 609 1902
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
If any part is found to be defective due to faulty manufacture
within the guarantee period, Husqvarna Outdoor Products,
through its Authorised Service Repairers will effect the repair or
replacement to the customer free of charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty adjust-
ment by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired, taken apart
or tampered with by any person not authorised by Husqvarna
Outdoor Products.
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
*
This guarantee is additional to, and in no way diminishes the
customers statutory rights.
Failures due to the following are not covered, therefore it is impor-
tant that you read the instructions contained in this Operator's
Manual and understand how to operate and maintain your machine:
Failures not covered by guarantee
*
Replacing worn or damaged blades
*
Failures as a result of shredding inapropriate material.
*
Failures as a result of incorrect adjustment of the cutting plate
*
Failures as a result of not reporting an initial fault.
*
Failures as a result of sudden impact.
*
Failures as a result of not using the product in accordance
with the instructions and recommendations contained in this
Operator's Manual.
*
Machines used for hire are not covered by this guarantee.
*
The following items listed are considered as wearing parts
and their life is dependent on regular maintenance and are,
therefore not normally subject to a valid warranty claim:
Blades, Electric Mains cable, Cutting Plate
*
Caution!
Husqvarna Outdoor Products does not accept liability under the
warranty for defects caused in whole or part, directly or indirectly
by the fitting of replacement parts or additional parts that are not
either manufactured or approved by Husqvarna Outdoor
Products, or by the machine having been modified in any way.
EC Declaration of Conformity
Newton Aycliffe, 01/02/2007
M. Bowden,
Research & Development Director
Guarantee & Guarantee Policy
I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,
NEWTON AYCLIFFE,
Co. Durham. DL5
6UP. Certify that the product:-
Category
........ Electric Quiet Shredder
Make
...........Husqvarna Outdoor Products
Conforms to the specifications of Directive
2000/14/EC
I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,
NEW-
TON AYCLIFFE,
Co. Durham. DL5 6UP Certify
the maximum weighted sound pressure
level
recorded on a sample of the above
product at the operator position under free
field conditions was: -
I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,
NEWTON AYCLIFFE,
Co. Durham. DL5
6UP Certify the maximum weighted root
mean square
value
recorded on a sample
of the above product at the operators hand
position was: -
Type of Cutting Device
...... Rotating Blades
Identification of Series
....... See Product Rating Label
Conformity Assessment Procedure
....ANNEX VI
Notified Body
..................... Intertek., Cleeve Road, Leatherhead,
Surrey. KT22 7SB England
Other Directives:-
...............98/37/EC, 89/336/EEC
& applicable standards:
-... EN61000-3-2, EN61000-3-3, EN55014-
1, EN50366, EN60335-1, prEN60335-2-93, EN13683, prEN50434
Type
............................................................................ PAS-2500
Width of Cut
................................................................ 40 mm
Speed of Rotation of Cutting Device
.......................... 40 RPM
Guaranteed sound power level
................................... 96 dB (A)
Measured Sound Power Level
.................................... 95 dB (A)
Level
............................................................................ 85 dB (A)
Value
........................................................................... 2.40 m/s
2
Weight
......................................................................... 33.5 kg
