Flying Tech G-Force250, Руководство по эксплуатации

Страница: 2 / 17

Assembly & Operations Manual
Thank you for purchasing this Flying Tech product. The G-Force 250 kit comes with everything you need
to build your own 250 FPV racing drone, except for radio gear and a battery. Whilst some previous
model building and flying experience may be an advantage, this product has been designed with the
beginner as well as the intermediate enthusiast in mind.
Please remember multirotors can be dangerous if not properly constructed, maintained and operated.
To that end, please follow the guidance in this manual carefully and always fly responsibly with due
regard for safety. Please also ensure you adhere to local and national laws or rules. Never fly within 50m
of people, animals and buildings and always fly outdoors.
Kit contents:
•
G-Force Carbon Fibre 250 Quadcopter Frame
•
DYS 250 Power Pack (4x BE1806 2300Kv Motor, 4x BLHeli 16Amp ESC, 5030 Propeller Set)
•
Main Frame PDB with Integrated LED Lighting
•
XT60 Battery Cable, Buzzer and 5volt / 12volt BECs
•
Acro Naze FC with PWM RX cable and Micro Minim OSD
•
CMOS Wide Angle FPV Camera
•
32 Channel 5.8Ghz FPV Transmitter
•
Fixings and Heat Shrink
•
Rubberised Battery Strap
Required:
•
6 Channel Radio Transmitter & Receiver
•
3S LiPO Battery 1300-2200mAH
Tools Required:
•
2x 2.5mm Allan or Hex Type Key
•
1x 2.0mm Allan or Hex Type Key
•
Thread-locking Fluid
•
Soldering Iron and Solder
•
Wire Cutters/Strippers
•
Heat Gun (Hair Dryer)
•
Multimeter (Not Essential)
•
Computer (Windows/Mac)
•
Micro USB Cable