⚫
hint:
Increasing the horizontal overlap rate increases the density of routes, and the
operating area per unit time will decrease.
Recommendation: The default heading overlap rate is 75%, and the lateral overlap
rate is 60%. If you want to achieve higher quality results, it is recommended that
the vertical overlap rate is not less than 80%, and the horizontal overlap rate is not
less than 65%.
Introduction to using the terrain function: Check the "Use terrain" function, the
ground station will automatically download the terrain elevation data and adjust
the minimum ground clearance of each route to the target flight height. This
function can ensure flight safety in areas with large height differences and avoid
accidents such as collisions with mountains.
⚫
Suggest:
In areas with large terrain fluctuations, select the "Use Terrain"
function of the ground station, and the ground station will automatically plan the
altitude of the route according to the terrain.
Automatically generate waypoints
After setting the aerial survey parameters, you can learn the relevant information
of aerial survey operations in the aerial survey information data column and click
Generate Waypoint to automatically plan and generate aerial survey tasks.
