12
Buttons on remote controller
Function introduction for combination buttons
Child lock function
Press " " and " " simultaneously to turn on or turn off child lock function. When child
lock function is on, " " icon is displayed on remote controller. If you operate the remote
controller, the " " icon will blink three times without sending signal to the unit.
In the heating mode, press "FAN" and "MODE" buttons together for 3s would start or cancel
the Force defrost.
Force defrost
●
In heating mode, pressing "MODE" and "
" button at the same time will enter/exit the low
temperature heating function.
● "
" would be showed on the remote controller after entered into the low temperature
heating funtion.
● When switching from one mode to another mode, low temperature heating function was
canceled. Turn off and then turn on air conditioner that will remain the low temperature
heating function. After powered on, the low temperature heating mode was default to off
status.
● In the low temperature heating function, "Sleep" and "Low temperature heating" function
cannot start at the same time. When low temperature heating function has already started,
meanwhile you press the "SLEEP" button, the air conditioner will exit low temperature
heating
mode and enter the sleep mode. Vice versa.
Note:
1.
In the low temperature heating function, the fan speed was default to Auto and non-ajusatable.
2. In the low temperature heating function, Turbo function can't be set. If enter the low
temperature heating function
, the turbo and quiet function that started before will be
canceled.
As well as when exit the low temperature heating function, it will resume .
3. When exit from the low temperature heating function, the speed and temperature will turn
into the original condition before it started.
4. You can set up other function.
Low temperature heating function setting
Содержание FSS 241 EI/JDF-N3
Страница 33: ......