T6-1000/T6-600
Service Information
2
•
Examine the case before you use the Product. Look for cracks or missing plastic. Carefully look at the insulation
around the terminals.
•
Examine the battery door decal for damage to this insulator. Look for any cracks, holes, or evidence of
delamination. This insulator houses a laminated foil that provides a capacitive current path for the FieldSense
function. This insulator provides a means of protection against electric shock when the COM probe test lead
(black) is installed into the back case.
•
The battery door must be closed and locked before you operate the Product.
•
Do not use the Product if it is damaged.
•
Disable the Product if it is damaged.
•
Do not use the Product if it operates incorrectly.
•
Do not use test leads if they are damaged. Examine the test leads for damaged insulation or exposed metal.
Check test lead continuity.
•
Limit operation to the specified measurement category, voltage, or amperage ratings.
•
Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
•
Use the correct terminals, function, and range for measurements.
•
Do not apply more than the rated voltage, between the terminals or between each terminal and earth ground.
•
Do not exceed the Measurement Category (CAT) rating of the lowest rated individual component of a Product,
probe, or accessory.
•
Keep fingers behind the finger guards on the probes.
•
Hold the Product behind the tactile barrier. See the Quick Reference Guide for this Product.
•
To use the FieldSense Ground Contact, make sure the – test probe (BLACK) is stowed in the storage location in
the back case before a FieldSense measurement. See the
Quick Reference Guide
for this Product.
•
Disconnect power and discharge all high-voltage capacitors before you measure resistance or continuity.
•
Replace the batteries when the low battery indicator shows to prevent incorrect measurements.
•
Do not operate the Product with covers removed or the case open. Hazardous voltage exposure is possible.
•
Have an approved technician repair the Product.
•
Use only specified replacement parts.
For safe operation and maintenance of the Product:
•
Remove batteries to prevent battery leakage and damage to the Product if it is not used for an extended period.
•
Repair the Product before use if the battery leaks.
•
Be sure that the battery polarity is correct to prevent battery leakage.
•
Clean the case with a damp cloth and detergent. Do not use abrasives or solvents.
Содержание T6-1000
Страница 4: ...ii T6 1000 T6 600 Service Information...
