manualshive.com logo in svg

Fluke SMFT-1000, Руководство пользователя, Страница: 31 / 48

Поделиться
Скачать
Fluke SMFT-1000 Скачать руководство пользователя страница 31

Multifunction PV Analyzer

Test Setup

27

3. Connect the clamp to the circuit under test.

Tip: Push 

 to see a connection diagram.

The PV Analyzer automatically detects if the measurement is ac or dc current.

4. Push 

 to hold the measurement.

The measurement is on hold.

5. Push 

 to save the results to memory.

A confirmation message with ID number shows on the display and then returns to the test 

screen.

Functional Tests

Checklist of functional tests.
To test:
1. Turn the rotary switch on the PV Analyzer to 

FUNC./P

AC/DC

.

2. Push 

 to start to record the results of the functional tests.

3. Use 

 to highlight the different checklist items.

4. Push 

 and 

 to select pass, fail, or N/A for the highlighted row.

5. Push 

 (Back) to return to the Power test.

If any check boxes are filled in, then 

 is available. All results show on the display until you 

clear for a new session regardless of power on/off or different day.

6. Push 

 to save the results to memory.

A confirmation message with ID number shows on the display and then returns to the test 

screen.

Shop for Fluke products online at:

1.888.610.7664

www.

MyFlukeStore

.com

Содержание SMFT-1000

















































Отзывы:

Нет отзывов