manualshive.com logo in svg

Fluke SMFT-1000, Руководство пользователя, Страница: 26 / 48

Поделиться
Скачать
Fluke SMFT-1000 Скачать руководство пользователя страница 26

SMFT-1000

Users Manual

22

Select PV Model

When the Irradiance Meter is not connected, no limits are available and no irradiance or 

temperature data shows on the display.
To take a measurement:
1. Connect the test leads from the PV Analyzer to the solar panel.

Tip: Push 

 to see a connection diagram.

The V

OC

 measurement shows on the display after you connect the test leads. The Pass/Fail 

icons do not show in this configuration.

2. Push 

 to start the I

SC

 measurement.

The V

OC

 and I

SC

 results show on the display.

3. Push 

 to save the results to memory.

A confirmation message with ID number shows on the display and then returns to the test 

screen.

Paired with Irradiance Meter Only

When the Irradiance Meter is connected and a PV model is not selected, no limits are available. 

The irradiance and temperature data from the Irradiance Meter shows on the display.
To take a measurement:
1. Connect the test leads from the PV Analyzer to the solar panel. The V

OC

 measurement 

automatically shows on the display.

Tip: Push 

 to see a connection diagram.

The V

OC

 measurement shows on the display after you connect the test leads. Irr & Tcell 

data from the Irradiance Meter shows on the display. The Pass/Fail icons do not show in 

this configuration. 

2. Push 

 to start the I

SC

 measurement.

The V

OC

 and I

SC

 results show on the display.

3. Push 

 to save the results to memory.

A confirmation message with ID number shows on the display and then returns to the test 

screen.

Shop for Fluke products online at:

1.888.610.7664

www.

MyFlukeStore

.com

Содержание SMFT-1000

















































Отзывы:

Нет отзывов