Fluke InSight XS Series, Руководство пользователя

Страница: 23 / 46

IR InSight Thermal Imager
Changing Color Palettes
15
Changing Color Palettes
You can switch between two of ten palettes by toggling the ON/OFF switch
between the two on positions, “I” and “II.”
To change one or both selected palettes:
1. Start the Camera by toggling the ON/OFF switch to the right, while
simultaneously pulling and holding the Frame Capture Trigger. This
opens the main menu.
2. Toggle the ON/OFF switch to either on position “I” or “II,”
depending on which palette you want to change.
3. Advance the main menu option by pulling and releasing the Frame
Capture Trigger until “Change Palette” is highlighted, and then
release the Frame Capture Trigger for 4 seconds.
4. Advance the submenu option by pulling and releasing the Frame
Capture Trigger to highlight the desired palette, and then release the
Frame Capture Trigger for 4 seconds to activate the palette change
and return to the main menu. Maintain the Frame Capture Trigger
release for another 4 seconds to return to Scan Target mode or go to
Step 5 to change the second selected palette.
5. To change the second palette, toggle the ON/OFF switch to either on
position “I” or “II,” depending on which palette you want to change
and repeat Steps 3 and 4.
Changing Date and Time
Your Camera has an internal calendar and clock. The date and time are
recorded within the image file when the image is saved. Using the SmartView
PC software provided with the Camera, you can update the time and date of
the Camera to the time and date in your PC.
Follow the appropriate procedure under Connecting Camera to a Computer
found later in this manual. If the Camera clock and calendar do not match
within 10 minutes of the PC clock and calendar, a pop-up window appears
asking if you want to set the Camera clock and calendar to match the PC. If
you select “Yes,” the Camera time and calendar change to match the PC. If
you select “No,” the Camera time and calendar remain unchanged.