Fluke InSight XS Series, Руководство пользователя

Страница: 22 / 46

XS, XST
Users Manual
14
Powering the Camera On and Off
Note
After powering on the Camera, it requires a boot up and warm up
period of approximately 30 seconds in order to maintain a crisp,
clear, real-time image. Approximately five minutes after powering on
the camera, the temperature measurement accuracy will be within the
specification requirements. The start-up screen appears after
approximately 10 seconds.
Insert a charged battery. See Charging and Replacing the Battery later in this
manual.
To start the Camera in Scan Target mode, toggle the ON/OFF switch to the
right.
To access the main menu upon start up, toggle the ON/OFF switch to the right,
while simultaneously pulling and holding the Frame Capture Trigger.
To power the camera off, toggle the ON/OFF switch to the left.
Understanding the Internal Calibration
Function
Your Camera has an internal calibration function that automatically adjusts the
camera electronics as needed to maintain a high quality image. During an
internal calibration, you may hear a faint “double click” sound from the
camera and see the word “Calibrating” appear on the display screen. The
image is frozen for approximately 1-2 seconds during the internal calibration
process.
Focusing
Your Camera has a manual lens/image focus. To focus the camera, remove the
lens cap, point the lens at the target, and manually rotate the lens focus ring
with your finger until the image is in focus.