Fluke DTX-1800, Техническое справочное руководство

Страница: 82 / 398

DTX Series CableAnalyzer
Technical Reference Handbook
2-22
Using the Auto Increment and
Sequential Cable ID Features
The auto increment and sequential ID features generate
cable IDs automatically. This frees you from having to enter
IDs manually after each test.
These features are useful when you test installations with
sequentially-numbered links.
When you use an ID from a list, the ID is marked with a “$”.
Note
The List feature lets you select IDs from a list
created with LinkWare software and downloaded
to the tester. See the LinkWare documentation for
details.
Using the Auto Increment Feature
The auto increment feature increments the last character in
the fiber ID you enter.
For example, if you save a test with the ID “A0”, the tester
increments the ID as follows:
A0, A1, A2…A9, A10, A11…A99, A100, A101…
Consecutive digits increment from right to left, but other
characters do not.
Letters increment through the alphabet shown on the text
editing screen:
1A, 1B, 1C…1Y, 1Z, 1Ç…1Û, 1Ü, 1A
To use the auto increment ID feature:
1 Turn the rotary switch to SETUP.
2 Use
D
to highlight Instrument Settings; then
press
H
.
3 Press
H
to select Cable ID Source.
4
D
to highlight Auto Increment; then press
H
.
5 Run a test; then press
N
.
6 Enter an ID in the ID: box.
7 Press
N
again.
The next time you run a test and press
N
, the incremented
cable ID appears in the ID box. Press
N
again to use the ID.