Fluke DDS Function Generator 271 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 132

background image

Introduction and Specifications

Introduction

1

1-3

The rate can be set from dc to 50 kHz internally, or dc to 1 MHz externally.

Triggered burst and gated modes

All waveforms are available as a triggered burst whereby each positive edge of the trigger

signal will produce one burst of the carrier, starting and stopping at the phase angle

specified by the start-stop phase setting.
The number of cycles in the burst can be set between 0.5 and 1023. The gated mode turns

the output signal on when the gating signal is high and off when it is low.
Both triggered and gated modes can be operated from the internal trigger generator

(0.005 Hz to 50 kHz) or from an external source (dc to 1 MHz).

Waveform hop and noise

The generator can be set up to hop between a number of different waveform settings,

either at a predetermined rate or in response to a manual trigger.
Up to 16 different hop waveforms can be defined in terms of frequency, amplitude,

function, offset and duration. Duration is variable in 1 ms steps up to 60 s. The generator

can also be set to simulate random noise within the bandwidth 0

.

03 Hz to 700 kHz with

adjustable amplitude and offset.

Multiple phase-locked generators

The signals from the reap panel

CLOCK IN/OUT

socket and

SYNC OUT

sockets can

be used to phase lock two or more generators.
Phase locked generators can be used to generate multi-phase waveforms or locked

waveforms of different frequencies.

Easy and convenient to use

All of the main generator parameters are clearly displayed together on a backlit liquid

crystal display (LCD) with 4 rows of 20 characters. Sub-menus are used for the

modulation modes and other complex functions.
All parameters can be entered directly from the numeric keypad. Alternatively most

parameters can be incremented or decremented using the rotary encoder.
This system combines quick and easy numeric data entry with quasi-analogue adjustment

when required.

Fully programmable via addressable RS232 and GPIB interfaces

The generator has RS-232 and GPIB (IEEE-488) interfaces which can be used for remote

control of all of the instrument functions and for downloading arbitrary waveforms.
As well as operating in conventional RS-232 mode the serial interface can be used in

addressable mode whereby up to 32 instruments can be linked to a single PC serial port.

1.888.475.5235

[email protected]

Fluke-Direct

.com

«
...
13
14
15
16
17
...
»

Содержание DDS Function Generator 271





































































































































Отзывы:

Нет отзывов

Похожие инструкции для DDS Function Generator 271

Бренд: YASKAWA Страницы: 44

Бренд: µ-Dimension Страницы: 17

Бренд: µ-Dimension Страницы: 16

Бренд: µ-Dimension Страницы: 6

Бренд: µ-Dimension Страницы: 8

Бренд: Patton electronics Страницы: 16

VARIOMAT 2 11MM

Бренд: Calpeda Страницы: 64

Бренд: M-system Страницы: 5

Бренд: PRIZM Страницы: 7

Track Rack F Series

Бренд: ZOMEWORKS Страницы: 2

Бренд: Xnexus Страницы: 20

Бренд: B PLUS TV Страницы: 10

Бренд: GME Страницы: 10

FRENIC-VG Series

Бренд: Fuji Electric Страницы: 346

Бренд: PhD Solutions Страницы: 12

Evershine TLC5000

Бренд: Zeversolar Страницы: 2

Бренд: Tripp Lite Страницы: 8

WHISPER 30 ULTRA

Бренд: Mastervolt Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды