Fluke BT521, Руководство пользователя

Страница: 23 / 54

Basic Operation and Setup of the Product
Turn On/Off Beep
2
2-3
Turn On/Off Beep
To turn on or turn off beep:
1. Push

to open the Setup menu.
2. Use
L
to highlight Beep , and push the Select softkey.
3. Use

and
L
to highlight Off or On , and push the Confirm softkey.
AutoHold and AutoSave Modes
Note
AutoHold and AutoSave are only available for the Battery
Resistance & Voltage and the Discharge functions.
When AutoHold is turned on, the "heart beat" icon shows on the display. The Product
will hold the reading when it remains stable for 1 second. After a successful AutoHold,
the HOLD icon shows on the display. The auto-held reading will not be released until the
user disconnects the test leads from the test object.
In AutoSave mode, the
AutoSave icon shows on the display. The auto-held reading will
be automatically saved to the internal memory.
hpo049.jpg
hpo048.jpg

Warning
To prevent possible electrical shock, fire, or personal injury, do
not use the HOLD function to measure unknown potentials.
When HOLD is turned on, the display does not change when a
different potential is measured.
To set AutoHold and AutoSave mode:
1. Push

to open the Setup menu.
2. Use
L
and

to highlight Auto mode .
3. Push the Select softkey to open the Auto mode menu.
4. Use
L
and

to highlight Disable , HOLD , or HOLD+SAVE .
5. Push the Confirm softkey.
6. Push the Back softkey to return to normal operation.