810
Getting Started
6
Storage
When not in use, keep the Tester in the protective
storage case. The case has sufficient space for the
Tester and all accessories.
Battery
The Tester operates on an internal rechargeable
Lithium-ion battery. After you unpack and inspect the
Tester, fully charge the battery before the first use.
Afterwards, charge the battery when the battery icon on
the screen indicates that power is low. To charge the
battery with the battery in place on the Tester:
1. Connect the ac adapter to the ac input socket on the
Tester.
2. Connect the adapter to a power source.
Or, to charge the battery outside the Tester:
1. Remove the battery from the Tester, see Figure 2.
2. Connect the ac adapter to the ac input socket of the
battery.
3. Connect the adapter to a power source.
Note
Three hours are necessary for a full battery
charge.
The color of the battery status LED shows:
Red
- battery is connected to the power source.
Green
- battery is connected to the power source and is
fully charged.
Caution
To avoid Tester damage:
•
Use only the ac adapter that is included with
the Tester.
•
Make sure that the external power
source is correctly rated for the Tester.
•
Do not leave batteries unused for
extended periods of time, either in the
product or in storage.
•
When a battery has not been used for six
months, check the charge status and
charge or dispose of the battery as
appropriate.
