Fluke 729 Pro, Руководство пользователя

Страница: 53 / 58

Automatic Pressure Calibrator
Maintenance
47
HART Commands
See Table 7 for Product HART commands.
Documenting Functionality
The Product uses calibration management software to communicate with documenting
software. The Product documents As Found, As Left, and single-reading results.
Download tasks by pre-defined tag numbers and save the results to Product memory.
Review or delete these results when necessary.
Table 7. Supported HART Commands
Number Command Description Type
1 Read Primary Variable Universal
2 Read Loop Current and Percent of Range Universal
3 Read Dynamic Range and Loop Current Universal
8 Read Dynamic Variable Classification Universal
12 Read Message Universal
13 Read Tag, Descriptor, Date Universal
14 Read Primary Variable Transducer Information Universal
15 Read Device Information Universal
17 Write Message Universal
18 Write Tag, Descriptor, Date Universal
20 Read Long Tag Universal
21 Read Unique Identifier Universal
35 Write Primary Variable Range Value Common Practice
40 Enter/Exit Fixed Current Mode Common Practice
41 Perform Self Test Common Practice
43 Set Primary Variable Zero Common Practice
44 Write Primary Variable Units Common Practice
45 Trim Loop Current Zero Common Practice
46 Trim Loop Current Gain Common Practice
48 Read Additional Device Status Common Practice