Fluke 6100B, Начало работы

Страница: 22 / 34

6100B/6105A
Getting Started
14
The Main User Interface Areas
The user interface is divided into five areas. There are three Menu panes, a message
window, and at the bottom, the context-sensitive Softkey indicators. See Figure 3.
gdw04.bmp
Figure 3. Graphical User Interface
The Menu fields are accessed sequentially clockwise by pushing

. A blue border
indicates the active Menu. As the focus changes between the menus, the actions of the
context-sensitive softkeys change accordingly.
•
The Output Menu at the top left of the screen allows selection of the channel that will
be operated upon by actions in the Waveform Menu. The channel being set-up is
indicated by a white background. The voltage or current and phase angle for all
connected phases is shown here. The Output Menu always shows the actual values
that are at the voltage and current binding posts (or will be when

is pushed). See
“Output Control” below.
•
The Global Settings Menu at the right of the display sets up common configurations
on the Master unit and all connected Auxiliary units.
•
The Waveform Menu is the area where the waveform for a channel is constructed.
This part of the user interface shows what will be output when the settings are
enabled.