Calibrator
Single Output Menu
45
Set AC Current Output
To set the ac current output (
Function > Single Output > ACI
), refer to
and the
example shown in Table
for output entry basics. The ac current output is at the VI AUX or 30A
terminal to OUTPUT LO.
Also see these sections:
•
•
•
•
Adjust Phase - Output to Reference
Set Resistance Output
Note
Since this is a synthesized output, make sure the terminal connections from the Calibrator to
the DUT are LO to LO and HI to HI.
To set a synthesized resistance output at the front-panel OUTPUT terminals (
Function > Single
Output > Resistance
), refer to
and the example shown in Table
for output entry
basics.
Also see these sections:
•
•
Set Capacitance Output
Note
Since this is a synthesized output, make sure the terminal connections from the Calibrator to
the DUT are LO to LO and HI to HI.
To set a synthesized capacitance output at the front-panel OUTPUT terminals (
Function > Single
Output > Capacitance
), refer to
and the example shown in Table
for output entry
basics.
Also see these sections:
•
•
Содержание 5540A
Страница 6: ...iv 5560A 5550A 5540A Operators Manual...
