Fluke 5500A, Руководство по обслуживанию

Страница: 72 / 296

5500A
Service Manual
3-18
3-20. Generating a Calibration Report
Three different calibration reports are available from the 5500A, each one either
formatted for printing, or in comma-separated variable format for importation into a
spreadsheet. Using the REPORT SETUP softkey under UTILITY FUNCTS / CAL, you
select lines per page, calibration interval , type of report, format, and which serial port to
use. The three types of report are as follows:
•
“stored,” which is a comparison of the most recent calibration shifts to those from
the previous calibration.
•
“active,” which is a comparison of the active calibration shifts to those from the
most recent calibration. (These shifts are all zero unless you have just done a new
calibration, but not saved the constants yet.)
•
“consts,” which is a listing of the active set of raw calibration constant values.
The following examples show the first few lines of calibration shifts and calibration
constants reports, in both printout and spreadsheet formats. The 90-day specification is
shown in these examples because a 90-day interval was selected in the REPORT SETUP
menu.
3-21. Calibration Shifts Report, Printout Format
FLUKE CORPORATION 5500A OUTPUT SHIFTS, ACTIVE VS. STORED 5500A S/N 0
------------------------------------------------------------------------------
Report string =
Cal dates: Active = 0, Stored = 0, Old = 0
------------------------------
DC Voltage (DCV)
------------------------------
RANGE AND VALUE OUTPUT SHIFT 90 DAY SPEC % OF SPEC
DC330MV +329.9999 mV +0.000 uV +0.00000% 0.00591% +0.0%
DC330MV -329.9999 mV +0.000 uV +0.00000% 0.00591% +0.0%
DC3_3V +3.299999 V +0.00000 mV +0.00000% 0.00420% +0.0%
DC3_3V -3.299999 V +0.00000 mV +0.00000% 0.00420% +0.0%
DC33V +32.99999 V +0.0000 mV +0.00000% 0.00400% +0.0%
DC33V -32.99999 V +0.0000 mV +0.00000% 0.00400% +0.0%
DC330V +329.9999 V +0.000 mV +0.00000% (NO SPEC) ----
DC330V +30.0000 V +0.000 mV +0.00000% 0.01000% +0.0%
DC330V -30.0000 V +0.000 mV +0.00000% 0.01000% +0.0%
DC330V -329.9999 V +0.000 mV +0.00000% (NO SPEC) ----
DC1000V +1000.000 V +0.00 mV +0.00000% (NO SPEC) ----
DC1000V +100.000 V +0.00 mV +0.00000% (NO SPEC) ----
DC1000V -100.000 V +0.00 mV +0.00000% (NO SPEC) ----
DC1000V -1000.000 V +0.00 mV +0.00000% (NO SPEC) ----
------------------------------
Secondary DC Voltage (DCV_DCV)
------------------------------
RANGE AND VALUE OUTPUT SHIFT 90 DAY SPEC % OF SPEC
DC3329.999 mV +0.00 uV +0.00000% 0.13610% +0.0%
DC330MV_S -329.999 mV +0.00 uV +0.00000% 0.13610% +0.0%
(continued)