Fluke 1000FLT, Руководство пользователя

Страница: 14 / 26

1000FLT
Users Manual
6
Lamp Test
The Lamp Test verifies that the lamp is gas-filled. This test
is done with or without the lamp in the fixture. You can test
with the rod extender pulled out or collapsed.

Warning
To prevent possible electrical shock or
personal injury, do not touch the rod extender
while performing the Lamp Test.
To test (see Table 3):
1. Turn on the Product.
2. Push

for <1 second. The green light around the
button perimeter turns on and the LED test indicator
blinks green

. Product is ready to test.
3. Continue to push and hold

for the entire test
duration.
4. Place the saddle end of the Product on the lamp and
continue to hold

.
If the fluorescent lamp is good (gas-filled), the
fluorescent lamp starts to blink

.
If the fluorescent lamp is bad (no gas), the fluorescent
lamp does not blink

.
5. Release

to end the test.
Note
The Product goes to the default Pin Test mode
after 30 seconds of non-use.
Table 3. Lamp Test
huz09.eps
Item LED Description

blinking green Test in progress

blinking green Good fluorescent lamp blinks

blinking green Bad fluorescent lamp does not blink
1
2
3