Fluke 1000FLT, Руководство пользователя

Страница: 19 / 26

Fluorescent Light Tester
Controls
11
Ballast Type Test
The Product has an optical sensor that detects whether
the ballast is magnetic or electronic (see Table 2 for the
sensor location). Make sure that the entire sensor is in-line
with the fluorescent light fixture as you test. See Figure 2.
The fluorescent light fixture must be turned on for this test.
Note
The Product goes to the default Pin Test mode after 30
seconds of non-use.
huz12.eps
Figure 2. Optical Sensor for Ballast Type Test