Fluke 1000FLT, Руководство пользователя

Страница: 17 / 26

Fluorescent Light Tester
Controls
9
To test (see Table 5):
1. Turn on the Product.
2. Push

for <1 second. The red light around the
button perimeter turns on and the LED test indicator
blinks red

.
3. Rotate the Product with the VoltAlert end towards the
test object.
4. Move the VoltAlert to
≤
10 cm (4 in) of the test object.
A solid red LED and a continuous beep (if beeper is
on) indicates that line voltage has been found

.
The indicator continues to blink red if no line voltage is
found

.
Note
The Product goes to the default Pin Test mode
after 30 seconds of non-use.
Table 5. Non-Contact Voltage Test
huz10.eps
Item LED Description
 blinking red
- Test in progress/no voltage found
- Rotate VoltAlert end towards test
object
 solid red
- Voltage found
- Continuous beep if the beeper is on
>1 sec
180˚
1 2