Fluke Biomedical ESA612 Скачать руководство пользователя страница 3

Страница: 3 / 88

Notices



system, or translated into any language without the written permission of Fluke Biomedical.

Fluke Biomedical agrees to a limited copyright release that allows you to reproduce manuals and other printed materials for use in service

training programs and other technical publications. If you would like other reproductions or distributions, submit a written request to Fluke

Biomedical.

Unpacking and Inspection

Follow standard receiving practices upon receipt of the instrument. Check the shipping carton for damage. If damage is found, stop unpacking

the instrument. Notify the carrier and ask for an agent to be present while the instrument is unpacked. There are no special unpacking

instructions, but be careful not to damage the instrument when unpacking it. Inspect the instrument for physical damage such as bent or

broken parts, dents, or scratches.

Technical Support

For application support or answers to technical questions, either email

[email protected]

or call 1-800- 850-4608 or 1-425-

446-6945.

Claims

Our routine method of shipment is via common carrier, FOB origin. Upon delivery, if physical damage is found, retain all packing materials in

their original condition and contact the carrier immediately to file a claim. If the instrument is delivered in good physical condition but does not

operate within specifications, or if there are any other problems not caused by shipping damage, please contact Fluke Biomedical or your local

sales representative.

Содержание ESA612

























































































Результаты поиска

Содержание ESA612

Отзывы:

Fluke Biomedical ESA612, Руководство пользователя, Страница: 3 / 88

Результаты поиска

Содержание ESA612

Отзывы: