Fluidwell F090-A-PL, Руководство пользователя

Страница: 10 / 32

FW-F090-A-PL-M_v0403_07_EN.docx
Page 10
To change or select a value:
To change a value, use

to select the digits and

to increase that value.
To select a setting, both

and

can be used.
If the new value is invalid, the increase sign

or decrease-sign

will be displayed while you are
programming.
When data is altered but ENTER is not pressed, then the alteration can still be cancelled by waiting
for 20 seconds or by pressing ENTER for three seconds: the PROG-procedure will be left
automatically and the former value reinstated.
Note: alterations will only be set after ENTER has been pressed!
To return to OPERATOR-level:
In order to return to the operator level, PROG will have to be pressed for three seconds. Also, when
no keys are pressed for 2 minutes, SETUP will be left automatically.