Inst.434 Viron XT Pool & Spa Pump V08_17
2
Serious injury or death may occur if this product is not used, operated or installed according to these instructions and
relevant Australian standards.
THIS APPLIANCE IS NOT INTENDED FOR USE BY YOUNG CHILDREN OR INFIRM PERSONS. PLEASE ENSURE YOUNG
CHILDREN ARE SUPERVISED SO THAT THEY DO NOT PLAY WITH THE APPLIANCE.
PUMP PRODUCES HIGH PRESSURES – STAND CLEAR OF PUMP AND ALL FILTRATION EQUIPMENT DURING START UP
PUMP MUST ONLY BE INSTALLED BY A QUALIFIED POOL INDUSTRY PROFESSIONAL. INSTALLERS, OPERATORS
AND OWNERS MUST READ THESE INSTRUCTIONS BEFORE USE.
PUMP AUTOMATICALLY RESTARTS AFTER HIGH LIMIT OPERATION, DISCONNECT POWER TO PUMP BEFORE
MAINTENANCE OR REPAIR
INCORRECT SETTING OF THE SPEEDS ON THIS PUMP MAY CAUSE ADVERSE FILTRATION OR OPERATION OF THE
SWIMMING POOL OR SPA. ENSURE PUMP IS INSTALLED, SET AND COMMISSIONED BY AN AUTHORISED
ASTRALPOOL DEALER.
OPERATING PUMP IN OVERDRIVE MODE WILL CREATE VERY HIGH WATER PRESSURE ENSURE ALL CONNECTIONS
ARE WATER TIGHT STAND CLEAR OF ANY FILTER LIDS AND OTHER EQUIPMENT IN THE SYSTEM WHEN OPERATING
IN OVERDRIVE
GENERAL
The Viron XT Pool Pump is a unique variable-speed AC motor combined with an energy efficient pump wet end. When
installed and plumbed correctly, the Viron XT will significantly reduce operating costs, lower noise levels and reduce
greenhouse emissions.
The Viron XT Pool Pump range is available in a variety of models, with the following factory set speeds which offer
approximate flow rates:
Model
High
Medium
Low
Viron P320 XT
320 lpm
206 lpm
128 lpm
Viron P520 XT
520 lpm
426 lpm
200 lpm
(Flow rates based on a maximum speed at 8 m total dynamic head).
Each speed can be easily changed to suit your pool size, filter, plumbing and application. The Viron XT Series pumps must
be installed by a pool professional trained by AstralPool to ensure it has been selected for the correct application, correctly
installed and set up to suit your pool and its operation fully explained to you.
