Inst.434 Viron XT Pool & Spa Pump V08_17
10
SPEED SELECTION EXAMPLES FOR VIRON P520 XT
Function
Speed
Vacuuming Pool or Spa
Medium Speed (high speed may collapse vacuum hose)
Operating Spa Jets
Medium or High Speed
Operating Waterfall or Water Feature
Medium Speed or High Speed, depending on effect
required
Cleaning up pool with Cloudy Water
Up to 24 hours on High Speed
General Filtration
Low Speed (8 hours in winter, 8 to 12 hours in summer)
Single Pump In-floor Cleaning System
Medium Speed for 3 to 3 hours per day and low speed for 5
or 6 hours per day
Compatible Pressure Cleaner
2 or 3 hours per day on high speed, 5 or 6 hours per day on
low speed
USE WITH SUCTION CLEANERS
When connecting a suction cleaner to the Viron XT pump, it essential that full prime is achieved on the pump prior to
connecting the cleaner hose. During operation at low speeds, the pump may only operate with partial prime in the hair and
lint pot chamber.
To operate a suction cleaner on your pump;
1.
Choose the speed button (low, medium or high) on which the pump will operate when the suction cleaner is
connected.
2.
Allow pump to operate for a minimum of 2 minutes to allow a full prime to be achieved.
3.
Connect cleaner plate and hose to skimmer/wall suction only after all air has been purged from the top of the hair
and lint pot of your Viron Pump.
4.
Adjust speed (with increase or decrease buttons) at which the cleaner will travel to all areas of the pool. Factory set
medium speed will usually operate all suction cleaner types in most pools. If using the Low Speed setting, it will
usually be necessary to increase the low speed to ensure the suction cleaner operates reliably.
5.
When cleaner is no longer required, disconnect and remove hose/cleaner plate from system. Select the lowest
filtration speed that keeps your pool clean.
6.
If replacing or selecting a new cleaner, AstralPool recommend our Robotic Range of Cleaners which operate
independently from the filter pump and allows the pump to operate at a speed which offers the maximum energy
(and cost) savings.
240v power
24v data
