Fluid E820 Fitness UBE, Руководство пользователя

Страница: 8 / 23

9
The E920 Control Arm
Chain tensioning bolts: Al-
lows for tightening the chain
or adjustment from side to
side. Make sure when tight-
ening only to adjust the same
amount for both bolts, other-
wise the sprocket will be mis-
aligned.
Note: Tightening
the right bolt only will pull the
right side of the crank assem-
bly toward you, tightening the
left will pull the left side to-
ward you. Use this feature to
realign the rear with the front
sprocket if needed or when
changing to a new chain.
Crank arm bolts: Loosen
all 8 bolts slightly before
adjusting/tightening
chain.
Inspection plate: Open to check chain tension.
Warning: Do not check chain
tension by hand!
E920 Adjustable crank arms: Designed with a full 120mm of
travel , the 300mm crank arms are designed for a wide range
of upper body workout possibilities. The numbered indenta-
tions allow for accurate positioning on both sides throughout
the range of travel. One side can also be turned inde-
pendently to allow for even greater variation during your up-
per body workouts.
Pedal Handle:
Loosen knob to
adjust handle posi-
tion from 0-90 de-
grees.
L-pin: Loosen to allow the control
arm to travel through 90 degrees
of travel. Note the telescoping
tube is gas assisted.
Tighten securely when desired
workout position is reached.