Fluid E820 Fitness UBE, Руководство пользователя

Страница: 7 / 23

8
Chain tensioning bolts: Al-
lows for tightening the chain or
adjustment from side to side.
Make sure when tightening only
to adjust the same amount for
both bolts, otherwise the
sprocket will be misaligned.
Note: Tightening the right bolt
only will pull the right side of the
crank assembly toward you,
tightening the left will pull the
left side toward you. Use this
feature to realign the rear with
the front sprocket if needed or
when changing to a new chain.
Crank arm bolts: Loos-
en all 8 bolts slightly be-
fore adjusting/tightening
chain.
The E820 Control Arm
Inspection plate:
Open to check chain
tension.
Warning: Do not
check chain
tension with
fingers!
L-pin: Loosen to allow the control
arm to travel through 90 degrees
of travel. Note the telescoping
tube is gas assisted.
Tighten securely when desired
workout position is reached.
Pedal Handle: Loosen knob
to adjust handle position
from 0-90 degrees.