MANUAL – TMFE2 en – 02/2020 Ed.
Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice.
STANDARD MAINTENANCE
The Fluid-o-Tech TMFR/TSFR series units maintenance and
replacement of parts subject to wear have to be done by a qualified
technician. Periodic cleaning of the circuit and filters is advisable in
order to avoid cavitation and wear of the internal components.
WARRANTY
Every new pump manufactured by Fluid-o-Tech is guaranteed to be
free of defects in workmanship and material when leaving the factory
for a period of 18 months from the production date stamped on the
pump’s housing, plus a period of 6 months to cover the warehouse
and transit time, or for a period of maximum 24 months from the
purchasing date to the product use. In no event shall this period
exceed 24 months from date of original invoice.
Fluid-o-Tech will repair or replace at its judgement part or all of the
product not conforming to this warranty.
Fluid-o-Tech’s responsibility under this warranty is limited to the
repair or replacement of defective equipment returned to us on a
D.D.P. basis, providing that our analysis discloses that such part or
parts were defective at the time of sale.
The warranty is not recognized if:
• The directions on how to handle, install or operate the unit are
disregarded.
• The unit has been disassembled or modified by anyone other
than a Fluid-o-Tech (or authorized by Fluid-o-Tech) engineer or
repaired with non-original components.
• The unit operated dry or in cavitation (throttled/undersized inlet or
filter).
• Solid extraneous particles are found in the pump.
• Evident signs of operating pressure higher than 16 bar (high
pressure may compromise the integrity of the internal parts of the
pump and cause leaking) are found.
• The unit has been utilized for an application for which it was not
intended to be used where the operating conditions and/or the
pumped fluids were incompatible with the pump itself and such
application has not been specifically approved by Fluid-o-Tech.
• In case of pumps equipped with relief valve, the operating
pressure have to be less than 3 bar below the relief valve
pressure setting. In this case the internal parts get hot, scale
develops and the hydraulic performances degrades.
Fluid-o-Tech Int’l Inc.
161 Atwater St.,
Plantsville CT (USA) 06479
Tel. +1 (860) 276 9270
Fax +1 (860) 620 0193
Fluid-o-Tech Asia (Shanghai) Co., Ltd.
2/F, Factory building 6 (1), No. 258, Zhijiang Road,
Fengxian District, Shanghai City, Z.P.: 201499 China
Tel. +86 (021) 67100 838
Fax +86 (021) 67100 605
Fluid-o-Tech srl
Via Leonardo da Vinci, 40
20094 Corsico, Milano, Italy
Tel. +39 02 9995 01
Fax +39 02 9995 0999
Fluid-o-Tech Int’l Inc. Japan
2nd Floor, 4-3-8, Espoir Todoroki,
Todoroki, Setagaya, Tokyo 158-0082
Tel. +81 (0) (3) 6432 1812
Fax +81 (0) (3) 6432 1813
Содержание TMFE2
Страница 10: ......
