4
5
6
7
1
2
3
No
BAS SYS TRIM CHK
Zero Trim
Yes
OK:C/CE
CANCEL:
→
Click “C/CE” to show
confirm menu
No
BAS SYS TRIM CHK
Zero Trim
YES:C/CE NO
→
?
-0.868
No
Zero Triming
-2.2
Basic Setup
Bas Sys Trim
CHK
PV Decimal
Total Decimal
Damping(s)
Lcd Rotate
01.0
Bas Sys Trim
CHK
PV Decimal
Total Decimal
Damping(s)
Bas Sys Trim
CHK
Max:99.9
Min: 0.1
Damping(s)
02.0
01.0
2.) Damping time
Damping time on the meter display and output. Set range o 1-99 9S (unit is "seconds").
Set as follows:
Click “C/CE” again into “zero trim”
confirm menu, if click “→”, quit “zero
trim” stage
Pls waiting “Zero trim” finish and automatically return Trim menu. Click “C/CE”
two times back to measurement mode
In measurement mode, click
“C/CE” two times into
configuration menu
Modify value
Current value
Lcd Rotate
Steps
Operation instructions
Interface show
Steps
Operation instructions
Interface show
Click “C/CE” again to run “zero
trim”, if click “→”, quit “zero trim”
stage
Click “↓” to choice Damping(s).
Click “→” into “damping time” setup
menu, “→” and “↓” key to set
Damping times
TRANSIMITTER
22
CONVERT PARTS
Http: // www.flowmeter.cc
CONVERT
