TM
-8888.8
m/h
82345678.8
3
m
3
TOTAL +
115.8%
OVER LIMIT
!
REVISION V50.2
Ⅲ
. Instrument started
1 .Working instrument showing
2 . Interface show
Flow direction
Instantaneous delivery
Unit of instantaneous delivery
Total accumulated
Unit of total accumulated
Warn of instrument
Edition number of program
Percentage of floe
Means of total accumulated
Specific alarm items
Before connect power, follow the manual of the first part of the note 1,2 and sensor part of
the installation manual to verify whether the system is properly installed and connections.
End customer can directly run instrument, the reason is including sensors and signal
transmitter of two parts, all of the data have been based on user requirements and technical
specifications of the company's manufacturing process in the factory setting.
After complete correct electric connection, run power on instrument. Instrument transmitter first
implementation of the initialization; display the company logo (see below). Wait 3 seconds after the
instrument into the own measurement mode, immediately began to flow measurement and
displays the current flow measurement value or other self-assemblies off information. If there is no
meter to power after the show (display without backlight), then the power supply and connectivity
in identifying ways to meet the requirements, may view the instrument power supply fuse is intact
(you can see the 8 common faults and processing).
If there is no meter to power after the show (display without backlight), then the power supply
and connectivity in identifying ways to meet the requirements, may view the instrument power
supply fuse is intact (you can see the 8 common faults and processing).
17
CONVERT PARTS
Http: // www.flowmeter.cc
CONVERT
