Flowserve StarTalk DTM, Быстрый старт

Страница: 201 / 398

StarTalk™ DTM Help for StarPac 3 System
© Flowserve Corporation
Version 1.0.0 – Printed November 1, 2013
Down Stream Pressure
Uses an external pressure input as the downstream process pressure for all internal calculations in
place of the StarPac sensor.
Valve Delta Pressure
Uses an external pressure input as the process differential pressure for all internal calculations (in
place of the StarPac differential pressure calculated by the difference from the StarPac internal
pressure sensors). The most common example is when a separate differential pressure transmitter is
used for cases when the application cannot withstand pressure drops of at least ten percent of inlet
pressure.
Molecular Weight
Uses an external molecular weight input for all internal calculations in place of the static value stored
in the StarPac configuration.
Specific Gravity
Uses an external Specific Gravity input for all internal calculations in place of the static value stored in
the StarPac configuration.
Liquid Fudge Factor
Input that allows you to make dynamic adjustments to the liquid flow calculation based on the value of
the input.
Gas Fudge Factor
Input that allows you to make dynamic adjustments to the gaseous flow calculation based on the value
of the input.
Action Buttons
The Apply button will save changes to the connected device.
The Retrieve button will retrieve the latest information from the device related to this page.