Flowserve StarTalk DTM, Быстрый старт

Страница: 300 / 398

StarTalk™ DTM Help for StarPac 3 System
© Flowserve Corporation
Version 1.0.0 – Printed November 1, 2013
Clicking the Retrieve All button will start the retrieval of all the connected StaPac System
configuration to be store in the instance of the DTM memory. It will also retrieve and update the values
related to the current page and tabs within the page.
The Retrieve Configuration from Device Status group box will appear automatic to display the status of
the retrieval of the entire configuration.
Note 1: The Save VCT button will only be enable once the entire configuration is load into memory
either from the
Retrieve All
or the
Load VCT
functionality is complete.
Note 2: VCT (Valtek Configuration Table) is the StarPac entire configuration file extension name.
The Load VCT button will open an open file dialog to allow the select of a VCT file to be load into
memory.
The Save VCT button will save the entire configuration store in the memory of the DTM to a folder
location and file name. A save file dialog will allow the selection of the folder location and file name.
Note: The Save VCT button will only be enable once the entire configuration is load into memory
either from the Retrieve All or the Load VCT functionality is complete.
The Abort button will abort the current retrieval of the StarPac Configuration.
Note: If no configuration is stored in memory, this action will stop the Save VCT button from been
enabled.