FlowLine EchoPod DX10 Series, Быстрый старт

Страница: 6 / 6

We do Your Level Best We do Your Level Best
Finalize Settings
The options on the right of the WebCal screen to finalize the
configuration.
The
Advanced
button is used for options available when setting up the sensor with
special, non-standard features. Many of these features are available for specific
applications that may change from time to time. Consult WebCal's
HELP
file for the
latest information on the use of any of these features.
The more commonly used Advanced features are the Invert Relay and Increase
Output Filtering described below.
Before configuration can be completed:
You must click the
Write to Unit
button to save the settings to the unit.
Then, click
Wiring Diagram
for a hard copy of the EchoPod’s settings.
Finally, enter the file name under which you wish to save the configuration
file and click
Save Config File
.
Configuration is now complete.
Disconnect the USB Fob before continuing to the next step: Mounting the EchoPod
®
.
For updates to WebCal, or to make sure you’re using the most up-to-date version
available, click the
Update
tab on the top of the WebCal screen.

Write to Unit
. Send your configuration into
EchoPod
®
.

Wiring Diagram
. Open PDF wiring
schematic of your configuration.

Advanced
. Configure advanced settings.
Read the section below on advanced setting
options

Factory Config
. Return EchoPod
®
to the
original factory configuration.

Clear Screen
. Clears the screen of
configuration settings.

Config File
. Name, save, open or print your
configuration for later use
.
Advanced Settings

Increase Output Filtering
. Select
this radio button to add additional
filtering.

Decrease Output Filtering
.
Select this radio button to remove
all output filtering.
Spec Tech Industrial Electric www.spectechind.com 888-773-2832
Spec Tech Industrial Electric www.spectechind.com 888-773-2832