background image

 

Rue J.H. Cool 19a | B-4840 Welkenraedt | BELGIUM 

Tel. : +32 (0)87 899 799 | Fax : +32 (0)87 899 790 

E-mail : [email protected] | www.flow-tronic.com 

 

 

 

-

 30 -

 

 

Warranty Statement 

 
Manufacturer warrants all  products of  its  manufacture to  be  free  from  defects in  workmanship and material under 
normal  use  and  service.  This  warranty  extends  for  a  period  of  twelve  (12)  months  after date  of  shipment, unless 
altered by mutual agreement between the purchaser and Flow-Tronic S.A. prior to the shipment of the product. If this 
product is believed to be defective, purchaser shall notify Flow-Tronic S.A. and will return the product to Flow-Tronic 
S.A., postage paid, within twelve (12) months after date of shipment by Flow-Tronic S.A. If the purchaser believes 

the return of the product to be impractical, Flow-Tronic S.A. shall have the option, but will not be required, to inspect 
the  product  wherever located.  In  any  event,  if  the  purchaser  requests  Flow-Tronic S.A.  visit  their  location,  the 
purchaser agrees  to  pay  the  non-warranty  expenses  of  travel,  lodging  and  subsistence  for  the  field  service 

response.  If  the  product  is  found  by  Flow-Tronic’s  inspection  to  be  defective  in  workmanship  or material,  the 
defective part or parts will either be repaired or replaced, at Flow-Tronic’s election, free of charge, and if necessary 
the product will be returned to purchaser, transportation prepaid to any point in Europe. If inspection by Flow-Tronic 
S.A. of such product does not disclose any defect of workmanship or material, Flow-Tronic’s regular service repair 
charges  will  apply.  Computing  devices sold  but  not  manufactured  by  Flow-Tronic S.A.  are  covered  only  by  the 
original manufacturer’s written warranty. Hence, this warranty statement does not apply. 
 

The  foregoing  warranty  is  manufacturer’s  sole  warranty,  and  all  other  warranties,  express, implied  or 
statutory, including any implied warranty of merchantability or fitness for a particular purpose, are negated 
and  excluded.  The  foregoing  warranty  is  in  lieu  of  all  other  warranties, guarantees,  representations, 
obligations or liabilities on the part of the manufacturer and Flow-Tronic S.A.  
 

Purchaser’s sole remedy and Flow-Tronic’s sole obligation for alleged product failure, whether under warranty claim or 
otherwise, shall  be  the  aforestated obligation of  manufacturer to  repair or  replace products returned within  twelve 
months after date of original shipment.Flow-Tronic shall not be liable for, and the purchaser assumes and agrees to 
indemnify and save harmless Flow-Tronic in respect to, any loss or damage that may arise through the use by the 
purchaser of any of Flow-Tronic’s products 
 

Содержание Raven-Eye



































Отзывы: