17
Instruction Manual
3. Menu Window Details
3.1 Menu W indows Arrangement
The ultrasonic flow meter supplies various of menus to meet user’s requests as below:
M00~M09 windows for the display of the flow rate, velocity, date time, totalizers, battery
voltage and estimated working hours for the battery.
M10~M29 windows for entering the pipe parameter.
M30~M38 windows for flow rate unit selections and totalizer unit selections.
M40~M49 windows for response time, zeroing, calibration and modification password
setup.
M50~M53 windows for the built-in logger
M60-M78 windows for time-keeper initialization, version and ESN information viewing and
alarms.
M82 window for viewing date totalizer.
M90~M94 are diagnostic windows for a more accurate measurement.
M97~M99 are not windows but commands for the outputting of display copying and pipe
parameter setups.
M+0~M+8 are windows for some additional functions, including a scientific calculator,
viewer on records such as total working hours, turn-on and turn-off times, dates
and times when the flow meter has been turned on or turned off.
Other menu windows such as M88 have no functions, or functions were cancelled because
they are not applied to this version ultrasonic flow meter.
The major reason why the menu windows are arranged in this way is that the software
programmer hopes that the menu window arrangement for this version can be compatibility
with the previous versions of the flow meter software. This will make it easier for the former
version users with the series of flow meter.
3.2 Menu W indow Details
Menu
window
No.
Function
M00
Display three positive negative net totalizers, signal strength, signal
quality and working status
M01
Display POS totalizer, flow rate, velocity, signal strength, signal quality and
working status
M02
Display NEG totalizer, flow rate, velocity, signal strength, signal quality and
working status
